[VoIP] WE inductor needed

[Paul Wills]

Rick,

Do you need the SD and CD.  They are of a size that I can scan to PDF quite 
easily.

The info for L6 is 15098E  or 1509BE  20 mH  Looking at the others, I 
suspect that "BE" is correct.

PDW

----- Original Message ----- 
From: "Richard Walsh" <wepbx at sbcglobal.net>
To: "Voice Over IP Tandem for Analog Switches" <voip at ckts.info>
Sent: Sunday, December 03, 2006 3:39 PM
Subject: [VoIP] WE inductor needed


>
> One of the electromechanical switch terminations I am working on for my 
> SXS switch is a WE 24B loop check generator (1000 to 3000 Hz sweep).
>  The unit is complete except for one adjustable inductor - the part is L6 
> on the unit.
>
>  Does anyone have a schematic that they could identify the part and the 
> inductive range?
>  The 24B LP CHK GEN is SD99707-01    J94024B-1
>
>  The needed inductor is like a small black hockey puck - perhaps 1 " high 
> and  1-1/2" in diameter.  I believe the part number is 1059x     (x= 
> letter code).  The 24B unit I have dates from 1962.
>
>  Might someone have the part, or suggest an alternative?
>
>  Many thanks,
>
>  Rick Walsh
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
>
>