[VoIP] WE inductor needed

[Richard Walsh]

Make that We P/N 1509BE  Ferrite inductor.
   
  Rick

Richard Walsh <wepbx at sbcglobal.net> wrote:
  Replying to my own message to report that Paul Wills has identified the needed L6 inductor for the 24B loop check generator as a WE part 1059BE with a value of 20MH (adjustable).

If anyone has such a part I would be apprecitive.

Rick Walsh

Richard Walsh wrote:

One of the electromechanical switch terminations I am working on for my SXS switch is a WE 24B loop check generator (1000 to 3000 Hz sweep). 
The unit is complete except for one adjustable inductor - the part is L6 on the unit.

Does anyone have a schematic that they could identify the part and the inductive range? 
The 24B LP CHK GEN is SD99707-01 J94024B-1

The needed inductor is like a small black hockey puck - perhaps 1 " high and 1-1/2" in diameter. I believe the part number is 1059x (x= letter code). The 24B unit I have dates from 1962.

Might someone have the part, or suggest an alternative?

Many thanks,

Rick Walsh
_______________________________________________
VoIP mailing list
VoIP at ckts.info
http://lists.ckts.info/mailman/listinfo/voip
Project Web Page: http://www.ckts.info/


_______________________________________________
VoIP mailing list
VoIP at ckts.info
http://lists.ckts.info/mailman/listinfo/voip
Project Web Page: http://www.ckts.info/