[VoIP] Patches

[ikjtel]

OK, I for one would like to try to get a better handle
on this (the outpulsing problem[s])...

When dialling into Lee's switch sometimes I receive a
fast-busy which I have assumed was caused by a
mis-dial.

Sometimes I can hear what sounds like a pause or
"burp" in what should be a regular rythm of pulses...

Has anyone been able to isolate whether this is due to
:

* improper make/break ratio
* version of asterisk and/or zaptel
* version of driver
* type of hardware in use (channel bank vs. x100p vs.
tdm400; brand of channel bank), etc.
* whether the "audible pulsing" patches have been
applied or not

The answers to the above might provide a clue 

Max

--- John Novack <jnovack at stromberg-carlson.org> wrote:
[snipped out some parts]
> Mine does seem to misdial too often.
> And it is pulse dialing into an ITEC selector, which
> SHOULD be more 
> forgiving.
> > My Panasonic switch can handle the ragged pulses,
> but Lee's stepper is 
> > a bit more picky.  Use either an X100P or TDM400P
> card instead, or be 
> > content with using DTMF.
> That is too bad, since not everyone has that choice.



 
____________________________________________________________________________________
Now that's room service!  Choose from over 150,000 hotels
in 45,000 destinations on Yahoo! Travel to find your fit.
http://farechase.yahoo.com/promo-generic-14795097