[VoIP] SxS Call Progress Sounds

[ikjtel]

--- John Novack <jnovack at stromberg-carlson.org> wrote:

> Probably more than you wanted to know about how I
> chose to wire up my 
> switch, but from this you can see that IF you got a
> fast busy on 25xx, 
> that was probably due to the mis pulse dialing.
> Right now I can't seem to properly dial 2231 for a

John

I probably didn't state this clearly in the first
email...  What I was saying was that it's *normal* in
an XY (and yours is no exception) to hear fast-busy
from the first selector during the outpulsing of the
first digit, no matter what digit is dialed.  At the
time of the initial break pulse of the first digit,
the first selector stops sending dial tone and starts
sending fast-busy.  IIRC, if the first selector is a
DA selector, and the first digit(s) absorbed, the busy
tone comes back on each subsequent digit dialled to
the first selector...  Western Electric style 1st
selectors send back continuous dial tone during this
period...

Max


 
____________________________________________________________________________________
Looking for earth-friendly autos? 
Browse Top Cars by "Green Rating" at Yahoo! Autos' Green Center.
http://autos.yahoo.com/green_center/