[VoIP] Initial deposit required recording

[Steph Kerman]

Mark,

Do you have the detailed description of the 1D type CTS?

Steph

Mark Rudholm wrote:
> Steph Kerman wrote:
>   
>> Mark Rudholm wrote:
>>     
>>> Something I've noticed with my D phones is that they mute the coin 
>>> tones much more than my C phones.
>>>       
>> I noticed recently that the coin maintenance practice specifically says 
>> the Ds mute completely and the Cs not.
>>     
>
> If you're in a quiet place, you can hear the coin tones on a D
> set, but just barely.  I assume it's unintentional (like the
> slight amount of pulse clicking you can hear on most rotary
> phones despite the receiver being "muted").
>
> If you know of a way to change the "muting" to something more
> like the attenuation applied by touch-tone dials when sending
> DTMF signals, I'd be interested.  Presumably there's a switch
> opening somewhere in the phone that could be defeated with a
> jumper or resistor (non-permanently).
>
>   
>>> There are some other minor differences. For example, if you put a coin 
>>> into a C phone while it is on-hook, the phone will pause and then 
>>> return it. If you do that on a D phone, the coin will sit on the 
>>> hopper until you go off-hook and then on-hook.
>>>       
>> That's interesting.  Never noticed.  I have C and E sets but haven't 
>> played with them much.  I'd like to have an A too but so far don't.
>>     
>
> I'd like to have an un-modified three-slot.  Unfortunately,
> those don't seem to exist anymore.
> _______________________________________________
> VoIP mailing list
> VoIP at lists.ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
>
>