[VoIP] T1 related Problem

[Kirt Stanfield]

Let me clarify oen thing.

When I was using the TDM 400 card I never saw the message about the 
native bridge,a nd the same thing worked. The problem started when I 
went to T1 and stoppe dusing the tDM 400 (although it is still in the  
machine).

It almost appears to be a timing problem - perhaps asterisk is trying 
the native bridging before it outpulses to the switch.

Kirt

Shane Young wrote:

>Quoting Kirt Stanfield <kirtley.stanfield at comcast.net>:
>
>  
>
>>Anyone have any ideas? Can I disable the 'native bridge' feature?
>>    
>>
>
>The native bridge happens after the answer, so it's not causing any
>problems, it is the result of everything else happening before it.
>
>When two calls are IP through asterisk and the far end answers,
>Asterisk will normally attempt to re-route the audio between the
>devices directly unless it needs to be in the audio path.
>
>I suppose this is the same for the ZAP channels, where it will attempt
>to connect the two channels directly through the pseudo-TDM bus.
>
>--Shane
>
>
>
>
>_______________________________________________
>VoIP mailing list
>VoIP at ckts.info
>http://lists.ckts.info/mailman/listinfo/voip
>Project Web Page: http://www.ckts.info/
>
>
>  
>