[VoIP] SIP, NAT and Linksys ATA

[Greg Blakely]

The one I currently use to host ATAs is not natted.  However, there was
a period of time when Dennis homed to my asterisk box at my house, which
was natted.  What I had to do then was port forward port 5060 udp and
10000-20000 to my asterisk box. 

> -----Original Message-----
> From: voip-bounces at ckts.info [mailto:voip-bounces at ckts.info] 
> On Behalf Of John Novack
> Sent: Monday, February 12, 2007 10:55 AM
> To: Voice Over IP Tandem for Analog Switches
> Subject: Re: [VoIP] SIP, NAT and Linksys ATA
> 
> If I am not mistaken, though, Greg's machine is NOT behind a router.
>  From the little I understand about NAT, two routers, each 
> with unknown NAT handling ( seems there are at least 4 types 
> of NAT handling ) rapidly make the problem more difficult 
> Kirt and I played with it a little many months ago, and the 
> best we could do was one way audio.
> 
> Nest of luck getting it to work
> Let everyone know how it was done, what devices, what model 
> routers, etc.
> 
> John Novack
> 
> 
> Lee Spenadel wrote:
> > Dennis,
> >
> > That would be great.  I can hopefully adapt the config to 
> the Linksys ATA.
> >
> > Lee
> >
> > -----Original Message-----
> > From: voip-bounces at ckts.info 
> [mailto:voip-bounces at ckts.info] On Behalf 
> > Of Dennis D Hock
> > Sent: Monday, February 12, 2007 7:12 AM
> > To: Voice Over IP Tandem for Analog Switches
> > Cc: VoIP at ckts.info
> > Subject: Re: [VoIP] SIP, NAT and Linksys ATA
> >
> >
> > Lee,
> >
> > Greg was able to get me going using the SPA 2K that I 
> have,.  I would 
> > be more than happy to burn a copy of theos econfigs on my SPA and 
> > perhaps Greg can fill in what he neede to do on the host.  Mine is 
> > working behind a D-Link router and 4 portr integral switch 
> from on the big box stores.
> >
> > Also have you tried the web page seems to me Greg had posted some 
> > examples of how this would go together.  At least I think there was 
> > some suggested configs up there, could be wrong.
> >
> > But if not there are enough us to be able to help.
> >
> > Dennis Hock
> >
> > -----voip-bounces at ckts.info wrote: -----
> >
> >
> > To: <VoIP at ckts.info>
> > From: "Lee Spenadel" <lee at spenadel.com> Sent by: 
> > voip-bounces at ckts.info
> > Date: 02/08/2007 09:46PM
> > Subject: [VoIP] SIP, NAT and Linksys ATA
> >
> > I have an non-subscribed Linksys PAP2T that I was using on 
> my Asterisk 
> > switch, now replaced with an Adtran T1 mux.  I'd like to 
> redeploy the 
> > ATA at a friend's house as a remote on my system.  I know 
> that NAT and 
> > SIP don't play well together, so I am wondering who has 
> managed to get 
> > this combination working and how the obstacles were overcome.
> >
> >
> >
> > Thanks
> >
> > Lee
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > If your car could travel at the speed of light, would your 
> headlights work?
> >
> > _______________________________________________
> > VoIP mailing list
> > VoIP at ckts.info
> > http://lists.ckts.info/mailman/listinfo/voipProject Web Page:
> > http://www.ckts.info/
> > _______________________________________________
> > VoIP mailing list
> > VoIP at ckts.info
> > http://lists.ckts.info/mailman/listinfo/voip
> > Project Web Page: http://www.ckts.info/
> >
> > _______________________________________________
> > VoIP mailing list
> > VoIP at ckts.info
> > http://lists.ckts.info/mailman/listinfo/voip
> > Project Web Page: http://www.ckts.info/
> >
> >   
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
> 
>