[VoIP] ANI

[Paul Wills]

Wow!  That might just do it.  

PDW

----- Original Message ----- 
From: "Shane Young" <voiptandem at shaneyoung.com>
To: <voip at ckts.info>
Sent: Thursday, January 04, 2007 4:36 PM
Subject: Re: [VoIP] ANI


> Ok, I give up. Here's how you do it your way.  :)
> 
> You need to download and compile "detect" here
> http://www.phrack.org/archives/50/P50-13
> 
> This will decode the MF saved in a wav file.
> 
> 
> Download this example wav file
> http://www.shaneyoung.com/kp04886516st.wav
> 
> # ./detect kp04886516st.wav
>  KP1+04886516+ST
> Done.
> 
> Write an AGI that answers and records a file which captures the ANI.
> Save the file.
> Run the detect program and parse/save the data returned.
> 
> Now you have your ANI the way (I think) you wanted to do it with no  
> Channel Bank and no T1 board.
> 
> 
> 
> 
> Quoting Paul Wills <pdwills at verizon.net>:
> 
>> I still have to wonder if, for simplicity's sake, someone in   
>> "Asterisk Land" knows how to call the tone detection routines as a   
>> freestanding program.
>>
>> The AGI interface can call a program and, in the process, pass it   
>> the channel being used and other information.  I already figured out  
>>  how to use the returned info and set a variable when the program is  
>>  called in the extensions.conf file.  I started looking at the AGI   
>> function GET DATA which does about 90% of what's needed if only it   
>> were possible to get it to work in MF mode.  Unfortunately, wherever  
>>  the tone detection routines are called is too deep for me to find.
>>
>> One benefit of a "freestanding" program is that it should work   
>> nicely with an ATA.
>>
>> PDW
>>
>>> From: Shane Young <voiptandem at shaneyoung.com>
>>> Date: 2007/01/04 Thu PM 02:10:04 CST
>>> To: voip at ckts.info
>>> Subject: Re: [VoIP] ANI
>>
>>> Yes, but probably not because of me.
>>>
>>> It helps me understand what the need is to support ANI with other   
>>> interfaces.
>>>
>>> Let's say (purely for the sake of argument) that Paul and Steph were
>>> the only ones left in the world that wanted to do ANI and didn't have
>>> channel banks and T1 cards.  If that were the case, I might spend more
>>> energy on finding them T1 cards and channel banks rather than making
>>> ANI work with other equipment.
>>>
>>>
>>>
>>>
>>> Quoting John Novack <jnovack at stromberg-carlson.org>:
>>>
>>>> Now, can you reveal why you want this information?
>>>> Should I lock and alarm the doors to my switchroom?
>>>>
>>>> Just curious
>>>>
>>>> John Novack
>>>>
>>>>
>>>> Shane Young wrote:
>>>>> Ok, the current list is:
>>>>>
>>>>> John Novack,
>>>>> Steph Kerman,
>>>>> Bob Riddell,
>>>>> Phil McCarter,
>>>>> Paul Wills
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> VoIP mailing list
>>>>> VoIP at ckts.info
>>>>> http://lists.ckts.info/mailman/listinfo/voip
>>>>> Project Web Page: http://www.ckts.info/
>>>>>
>>>>>
>>>>>
>>>> _______________________________________________
>>>> VoIP mailing list
>>>> VoIP at ckts.info
>>>> http://lists.ckts.info/mailman/listinfo/voip
>>>> Project Web Page: http://www.ckts.info/
>>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> VoIP mailing list
>>> VoIP at ckts.info
>>> http://lists.ckts.info/mailman/listinfo/voip
>>> Project Web Page: http://www.ckts.info/
>>
>>
>> _______________________________________________
>> VoIP mailing list
>> VoIP at ckts.info
>> http://lists.ckts.info/mailman/listinfo/voip
>> Project Web Page: http://www.ckts.info/
>>
>>
> 
> 
> 
> 
> 
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
> 
>