[VoIP] Motorola VT1005

[john jones]

Yeah,

So how do we do that?  Otherwise, we're just sending
emails back and forth about what might happen. It
seems to me that we need/want to have a method to
characterize whether a solution, be it PIC, WS relay,
ATA, channel-bank or bubble-gum actually works well. 
Your point is valid.  Different products behave
differently.  How do we pick good ones?


John 

 
--- Steph Kerman <stfkerman at jps.net> wrote:

> Any test dial needs to be characterized or the
> result is meaningless.  
> You have to know in advance whether it SHOULD be
> recognized properly or not.
> 
> Steph
> 
> john jones wrote:
> > There are a bunch of setting for pps and
> make/break
> > ratio so I suspect it would be pretty flexible. 
> > However, the $64K question is, what is a good
> test.
> >
> >
> > Folks could send me "bad" dials so I can
> experiment.
> >
> > John
> >
> >
> > --- Steph Kerman <stfkerman at jps.net> wrote:
> >
> >   
> >> Seems reasonable to me for what it sounds like it
> >> does.  Again... how 
> >> "real world" is the DP detection?
> >>
> >> SK
> >>
> >> john jones wrote:
> >>     
> >>> Is the Cisco MC3810 too expensive (~$140) for 6
> >>> ports)?
> >>>
> >>> Just wondering
> >>>
> >>> John
> >>>
> >>>
> >>> --- Doug Alderdice <ka2wft at arrl.net> wrote:
> >>>
> >>>   
> >>>       
> >>>> At 1/8/2007 01:56 PM -0500, Steph Kerman wrote:
> >>>>     
> >>>>         
> >>>>> I'm still convinced that there is an
> application
> >>>>>       
> >>>>>           
> >>>> for a reliable DP/DTMF
> >>>>     
> >>>>         
> >>>>> converter even though the "budget be damned",
> >>>>>           
> >> "the
> >>     
> >>>>>       
> >>>>>           
> >>>> more unnecessary
> >>>>     
> >>>>         
> >>>>> trunks the merrier" T1 advocates are
> dismissive
> >>>>>           
> >> of
> >>     
> >>>>>       
> >>>>>           
> >>>> the idea.
> >>>>
> >>>> Indeed.  A bunch of T1 ports MIGHT be fun to
> play
> >>>> with if it weren't for 
> >>>> the cost.  But the key word there is play.  I
> am
> >>>> just looking for a couple 
> >>>> of reliable DP capable ports in and out to my
> >>>>         
> >> switch
> >>     
> >>>> with a minimum of 
> >>>> boxes/pieces betwixt.
> >>>>
> >>>> D.
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> VoIP mailing list
> >>>> VoIP at ckts.info
> >>>> http://lists.ckts.info/mailman/listinfo/voip
> >>>> Project Web Page: http://www.ckts.info/
> >>>>
> >>>>
> >>>>     
> >>>>         
> >>> _______________________________________________
> >>> VoIP mailing list
> >>> VoIP at ckts.info
> >>> http://lists.ckts.info/mailman/listinfo/voip
> >>> Project Web Page: http://www.ckts.info/
> >>>
> >>>
> >>>   
> >>>       
> >> _______________________________________________
> >> VoIP mailing list
> >> VoIP at ckts.info
> >> http://lists.ckts.info/mailman/listinfo/voip
> >> Project Web Page: http://www.ckts.info/
> >>
> >>
> >>     
> >
> >
> > _______________________________________________
> > VoIP mailing list
> > VoIP at ckts.info
> > http://lists.ckts.info/mailman/listinfo/voip
> > Project Web Page: http://www.ckts.info/
> >
> >
> >   
> 
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
> 
>