[VoIP] Caller ID Number

[Shane Young]

Try this:

exten => xxx,1,SET(CALLERID(ani)=2005551212)



Quoting Paul Wills <pdwills at cedarknolltelephone.com>:

> Here's one for the experts:
>
> I'm trying to set a Caller ID number in extensions.conf.  For some reason
> the caller ID number is set in numerous places.  The one in zapata.conf
> seems to be the one that works when I dial the SIP phone.
>
> Is it not possible to set it from extensions.conf?  There is a CALLERID in
> the Globals section but it doesn't seem to matter what's in it.
>
> By the way, the ANI is about 80% working.  I am able to pull in the number
> from the E&M port on the Cisco 3810 router, pass it to the outgoing call but
> can't figure out how to make it appear as a callerid number.  (Thus the
> question above.)
>
> So far I have to say that the Cisco 3810 is, by far, the most cost effective
> way to implement a CNET installation.  The sound quality is way ahead of the
> Digium cards and, looking on eBay, one can find one for a lot less money.
>
> A tip of the switch cover should go out to John Jones for coming up with it.
>
> PDW
>
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
>