[VoIP] Ti and Asterisk

[Lee Spenadel]

Mike,

I purchased an Adtran 850 with 4 FXS and one FXO.  You will need FXO ports
to connect to your Step switch.  I connected my SxS to Asterisk using an
extension off of the SxS, therefore I needed an FXO to do it.  The T1 ends
up being very inexpensive on a port by port basis and I've ended up
deploying more Asterisk extensions that way.  So your decision to go Adtran
is not a bad one.

Lee

-----Original Message-----
From: voip-bounces at ckts.info [mailto:voip-bounces at ckts.info] On Behalf Of
Michael Zaiontz
Sent: Monday, July 02, 2007 5:39 PM
To: Voice Over IP Tandem for Analog Switches
Subject: [VoIP] Ti and Asterisk

Hi all!

You can tell I have too much time on my hands by the number of posts I've
made lately.

I've been dying to try something with T1. There's a Adtran 850 with 4 FXS
cards at a good price on ebay.  Am I right in thinking all I'll need is the
850 and a T1 card for my Asterisk box?  Till I get my step switch up and
running, at least I'll have some extra extensions. (and something else to
play with).

Thanks,
Mike
_______________________________________________
VoIP mailing list
VoIP at ckts.info
http://lists.ckts.info/mailman/listinfo/voip
Project Web Page: http://www.ckts.info/