[VoIP] Ti and Asterisk

[Dennis D Hock]

Mike,

Adtran makes good equipment and will serve you well.  As has been said you
will need an FXO to tie to your other switch but all in good time.  I
believe all the recentAdtran documentation is on line making it easy to
access and use.  Od course as you said you will ned to terminate the T1 ona
dedsicated board / card or with a multiprocess devicesuch as the Cisco 3810
also on the eplace .  John and others can tell you more about the
requirements for the 3810 in terms of memory and release etc.

Good luck with the eplace.

Dennis Hock

-----voip-bounces at ckts.info wrote: -----


To: "Voice Over IP Tandem for Analog Switches" <voip at ckts.info>
From: "Michael Zaiontz" <mzaiontz at bellsouth.net>
Sent by: voip-bounces at ckts.info
Date: 07/02/2007 05:38PM
Subject: [VoIP] Ti and Asterisk

Hi all!

You can tell I have too much time on my hands by the number of posts I've
made lately.

I've been dying to try something with T1. There's a Adtran 850 with 4 FXS
cards at a good price on ebay.  Am I right in thinking all I'll need is the
850 and a T1 card for my Asterisk box?  Till I get my step switch up and
running, at least I'll have some extra extensions. (and something else to
play with).

Thanks,
Mike
_______________________________________________
VoIP mailing list
VoIP at ckts.info
http://lists.ckts.info/mailman/listinfo/voipProject Web Page:
http://www.ckts.info/