[VoIP] Bogus CallerID (oops)

[Greg Blakely]

The switch I work on in my real life is an EWSD.  We offer NI2, and NI2
only.  Not sure if the 5E-type PRI is even available on EWSD, but it isn't
in the software load that we have purchased from Nokia Siemens. So, our
customers have to either adapt, or use CAS/DAL. (or loop start/ground start
lines).

> -----Original Message-----
> From: voip-bounces at ckts.info [mailto:voip-bounces at ckts.info] 
> On Behalf Of Dennis D Hock
> Sent: Monday, July 16, 2007 4:52 AM
> To: Voice Over IP Tandem for Analog Switches
> Subject: Re: [VoIP] Bogus CallerID (oops)
> 
> 
> Rusty,
> 
> I forgot I think we have spoken before.  Sorry I didn't 
> recall.  We have PRIs off the BLVLMIBV to our Western Wayne 
> Regional HQ.  They can't do or choose not to support 5E 
> emulation and have a problem with some maintenance commands.  
> We interface as NI2 as that is all that SBC claimed they 
> could support at the time.  Funny how this close to Detroit 
> Metro area, actually in it, that switch got placed.  SBC / 
> Ameritech seemd to prefer to use the 5E and DMS 100 in most 
> of the more populous areas of the stae.  The EWSD seemed to 
> be destined for more rural areas.  I believe there are 
> several in the Thumb or maybe they are remoted off one host 
> in Saginaw and a whole group of them across the UP.
>