[VoIP] Asterisk and Payphones

[Lee Spenadel]

Mark,

While I don't have Coin Services I, I do have BSPs from Bell of PA and NYT
that cover most of what's in it.  Tell me the BSP number you need and I may
have it.  BTW, all of my 3-slots are CF, as are my single-slots.

Lee

-----Original Message-----
From: voip-bounces at ckts.info [mailto:voip-bounces at ckts.info] On Behalf Of
Mark Rudholm
Sent: Tuesday, July 31, 2007 10:25 AM
To: Voice Over IP Tandem for Analog Switches
Subject: Re: [VoIP] Asterisk and Payphones

I probably should start thinking about CF service as well.
The phones I have are all DTF, although my 2C2s can be
configured for CF as well (although I don't know how to
do it).

I currently have a saved search on ebay that will email me
whenever an item with "manual" shows up in the telephones
section.  The only BSP I have is Coin Services Manual II,
which covers only the booth wiring (lights, fans, etc).
So not much useful, there.

Once I get the right book(s), I can think about stuff like
post-pay, CF, initial deposit test, stuck coin test, even
three-slot support...

Dennis D Hock wrote:
> I'd be interested in following this but I only have Semi-Post-Pay units.
> Although that North is strappable I think as a CF set.
> 
> Dennis Hock
> 
> -----voip-bounces at ckts.info wrote: -----
> 
> 
> To: "Voice Over IP Tandem for Analog Switches" <voip at ckts.info>
> From: "Jayson Smith" <ratguy at insightbb.com>
> Sent by: voip-bounces at ckts.info
> Date: 07/31/2007 08:26AM
> Subject: Re: [VoIP] Asterisk and Payphones
> 
> Hi,
> I'd be interested in such a thing, except that I don't have any coin
phones
> now. I'd love to get one to play around with, though! How are you doing
> this? Are you developing hardware to handle coin collect and coin return?
> Thanks.
> 
> ----- Original Message -----
> From: "Mark Rudholm" <mark at rudholm.com>
> To: "Voice Over IP Tandem for Analog Switches" <voip at ckts.info>
> Sent: Monday, July 30, 2007 8:00 PM
> Subject: [VoIP] Asterisk and Payphones
> 
> 
>> Greetings all,
>>
>> I've been working on-and-off on a project to emulate a coin
>> service line with Asterisk, as I have a collection of single-
>> slot payphones and no switchgear that will provide coin service.
>>
>> I'm curious if anyone else would be interested in such a setup.
>> Is this something anyone else has an interest in?
>>
>> I have two hardware designs done and will be prototyping at
>> least one of them as soon as my Mouser order arrives.  I spoke
>> to Mark Spencer about coin tone detection in Asterisk and while
>> it hasn't been done, he gave me pointers about how to add it to
>> the existing DTMF decode logic that I plan to experiment with
>> once I have the hardware working the way I want.
>>
>> -Mark
>> _______________________________________________
>> VoIP mailing list
>> VoIP at ckts.info
>> http://lists.ckts.info/mailman/listinfo/voip
>> Project Web Page: http://www.ckts.info/
>>
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/

_______________________________________________
VoIP mailing list
VoIP at ckts.info
http://lists.ckts.info/mailman/listinfo/voip
Project Web Page: http://www.ckts.info/