[VoIP] Cisco 3810

Fri Jun 1 13:55:15 CDT 2007

I used hyperterminal from a windows machine set to 9600,n,8,1 and NO 
flow control

Once you get the Ethernet port set up you can telnet to the box.
John Jones is the highest authority on this though.
 From my experiences, cut and pasting of the commands doesn't work well, 
due to lack of any flow control. That seems to be the way Cisco set up 
the console port!

John Novack

Dennis D Hock wrote:
> OK, don't need the console cable as I already have one.  Are there any
> parcticular settings to setup the console port (probably should look in the
> book).
>
> Dennis
>
> -----voip-bounces at ckts.info wrote: -----
>
>
> To: Voice Over IP Tandem for Analog Switches <voip at ckts.info>
> From: john jones <jjones3601 at yahoo.com>
> Sent by: voip-bounces at ckts.info
> Date: 06/01/2007 02:42PM
> Subject: Re: [VoIP] Cisco 3810
>
> No,  It just wasn't in the list of specs you sent.  I think we've received
> 3810's from the same guy and they seem to be max'd out.
>
>
> Just power it up to see.
>
> Let me know if you need a console cable.
>
> John
>
> ----- Original Message ----
> From: Dennis D Hock <hockd at dteenergy.com>
> To: Voice Over IP Tandem for Analog Switches <voip at ckts.info>
> Sent: Friday, June 1, 2007 9:48:46 AM
> Subject: Re: [VoIP] Cisco 3810
>
> John, that is to say I don't have it???  Any idea the cost??  ballpark
>
> Thanks,
>
> Dennis H
>
> -----voip-bounces at ckts.info wrote: -----
>
>
> To: Voice Over IP Tandem for Analog Switches <voip at ckts.info>
> From: john jones <jjones3601 at yahoo.com>
> Sent by: voip-bounces at ckts.info
> Date: 06/01/2007 08:37AM
> cc: Voice Over IP Tandem for Analog Switches <voip at ckts.info>
> Subject: Re: [VoIP] Cisco 3810
>
> You also want to make sure you get 64M of DRAM, or factor in the cost of an
> upgrade if it isn't equipped that way from the beginning.
>
> John
>
> ----- Original Message ----
> From: Dennis D Hock <hockd at dteenergy.com>
> To: Voice Over IP Tandem for Analog Switches <voip at ckts.info>
> Cc: Voice Over IP Tandem for Analog Switches <voip at ckts.info>
> Sent: Friday, June 1, 2007 5:01:44 AM
> Subject: Re: [VoIP] Cisco 3810
>
>
> Lee and others.  the person I purchased the 3810 from was Chris at West
> tech recyclers out west.  He is at chrisk at westechrecyclers.com.  A short
> summary of the unit shows it has 1 serial interface, I channelized T1/PRI
> port, 256K non volatile config memory, 16384K bytes of processor board Sys
> flash (AMD29F016), 1 2DSP High perfoprmance Compression Module (v01.A0, 2
> serial (sync/async) network interface. It also has a combo Analog Voice
> Module containign 4 FXS and 2 FXO.
>
> These folks were very easy to do business with.  I purchased two units (
> one for me, one for a fellow at work).  The only problem we had so far was
> they seemed to have lost the order in their shipping dept.  It was however
> very quickly made right when I hadn't received the units and inquired.  It
> sounded like they had this package and had lost the address it was to be
> sent to.  I would have no problem using them again.
>
> At the time he had a selection of these and of course other units to choose
> from.
>
> Hope this helps all.
>
> Dennis Hock
>
> -----voip-bounces at ckts.info wrote: -----
>
>
> To: Voice Over IP Tandem for Analog Switches <voip at ckts.info>,
> jnovack at stromberg-carlson.org
> From: john jones <jjones3601 at yahoo.com>
> Sent by: voip-bounces at ckts.info
> Date: 05/31/2007 07:39PM
> Subject: Re: [VoIP] Cisco 3810
>
> The FXO port supports DTMF, MF, and pulse dialing.
>
> On one of my 3810's, ( I have routers like you guys have phones) has a FXO
> port in slot 1/6.
>
> To change the out-pulsing mode, use the following command
>
> BatPhone(config-voiceport)#dial
> BatPhone(config-voiceport)#dial-type ?
> dtmf   touch-tone dialer
> mf     mf-tone dialer
> pulse  pulse dialer
>
>
>
> Just pick the one you want.
>
> The E&M interface is exactly the same.
>
> The FXS port supports DTMF and pulse dialing.  I've never tried MF on an
> FXS port and I'm not going to try it now!
>
> John
>
>
> ----- Original Message ----
> From: Lee Spenadel <lee at spenadel.com>
> To: jnovack at stromberg-carlson.org; Voice Over IP Tandem for Analog Switches
> <voip at ckts.info>
> Sent: Thursday, May 31, 2007 7:14:56 AM
> Subject: Re: [VoIP] Cisco 3810
>
> So was I.  How much was it?  I'm wondering if that would be a nice device
> to
> use for FXO in lieu of the Adtran given the outpulsing problem toward my
> SxS.
>
> L
>
> -----Original Message-----
> From: voip-bounces at ckts.info [mailto:voip-bounces at ckts.info] On Behalf Of
> John Novack
> Sent: Thursday, May 31, 2007 12:10 AM
> To: Voice Over IP Tandem for Analog Switches
> Subject: Re: [VoIP] Cisco 3810
>
> I see Russ Price is awake this late to enjoy my Cisco!
>
> JN
>
>
> John Novack wrote:
>   
>> On a lighter note, with John Jones expert help, I have been working a
>> little with the Cisco 3810
>> Reloaded with SIP software, the box can be equipped with 6 ports, in any
>> mix, of FXS, FXO or E&M circuits.
>> Paul Wills is using one for his switch and ANI.
>> I have mine on line right now set up for several foreign Ringback tones.
>> Though it may not be available at all times, give it a call at 666-3101
>> through 3104 for Cisco's electronic version of some other than North
>> American precise tones. UK, RU, EG and JP
>> No phones connected, so one can call at odd hours.
>>
>> John Novack
>> _______________________________________________
>> VoIP mailing list
>> VoIP at ckts.info
>> http://lists.ckts.info/mailman/listinfo/voip
>> Project Web Page: http://www.ckts.info/
>>
>>
>>     
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
>
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
>
>
>
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voipProjectWebPage:
> http://www.ckts.info/
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voipProjectWeb Page:
> http://www.ckts.info/
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
>
>
>
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voipProject Web Page:
> http://www.ckts.info/
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
>
>   