[VoIP] Additional Asterisk Features

[Lee Spenadel]

Nathan,

Asterisk is the center of my switching universe, tying together my 555 PBX,
home built SxS, Strowger PAX and my manual 506 PBX.  It allowed me to tie
together these stand alone systems so that I can hop from one system to
another, as well as utilize the StanaPhone (Stana-In to be exact) service to
allow calls inbound from the PSTN to my switches.  The ringdown feature is
built in to *, but documentation on its implementation is sparse.  

I use an Adtran Total Access 850 to give me FXS and FXO ports, which is how
I'm tying everything together.  

You're only limited by your imagination in terms of what you can do with it.

Lee

-----Original Message-----
From: voip-bounces at ckts.info [mailto:voip-bounces at ckts.info] On Behalf Of
WATSON061502 at ameritech.net
Sent: Wednesday, June 20, 2007 5:42 PM
To: Voice Over IP Tandem for Analog Switches
Subject: Re: [VoIP] Additional Asterisk Features

Lee,

Do you have this implemented as a feature on another switch (such as an 
electromechanical switch), or do you use * exclusively as your phone switch?

Thanks,

Nathan


--- Original Message ---
From: "Lee Spenadel" <lee at spenadel.com>

>I've implemented Voice Mail and Music on Hold.  Both are very easy to use.
>If you are on a call and flash the hookswitch on the caller, they should 
get
>MOH.  I'm using the Private Line Automatic Ringdown feature for my front
>door phone. It's set to ring to my office line when someone goes off-hook.



_______________________________________________
VoIP mailing list
VoIP at ckts.info
http://lists.ckts.info/mailman/listinfo/voip
Project Web Page: http://www.ckts.info/