[VoIP] Anyone Using H323 protocol - Preferably on a Cisco ATA
john jones
jjones3601 at yahoo.com
Thu Mar 29 14:42:05 CST 2007
Ian,
Are you in Wales? I'll be going to Llanberis in
North Wales near Bangor at the end of April. Maybe
if you are somwhat near and you have some time, we
could meet?
Thanks!
John
--- Ian Jolly <ian at uax.org.uk> wrote:
> >From the Cisco website - you appear to need a
> licence to use SIP with this
> ATA !!
>
> "Table 2. Cisco ATA 186 Analog Telephone Adaptors
> Description Part Number
> Cisco ATA 186 with 600 ohm impedance ATA186-I1-A
> Cisco ATA 186 with complex impedance (270 ohm in
> series with 750 ohm and 150
> NF in parallel) ATA186-I2-A
> CallManager Unit license for each ATA (1 per device
> required) SW-CCM-UL-ANA
> Unit license for SIP, for each ATA (1 per device
> required) SW-SMH-UL-ATA-1P
> Cisco CallManager Express license for each ATA (1
> per device required)
> SW-CCME-UL-ANA
>
>
> Ian Jolly
>
> +64 8532 864 from CNET
> +44 (0) 352 82 26 (via a 1929 GPO Rural
> Automatic eXchange!) from
> CNET - the Heritage Telephone Network
> +44 (0)1352 83 82 26 (via a 1929 GPO Rural Automatic
> eXchange!) from Public
> Telephone Network
> FWD Telephone No 83 2230
>
>
> ----- Original Message -----
> From: "Shane Young" <voiptandem at shaneyoung.com>
> To: <voip at ckts.info>
> Sent: Saturday, March 24, 2007 11:53 AM
> Subject: Re: [VoIP] Anyone Using H323 protocol -
> Preferably on a Cisco ATA
>
>
> > It might be easier to use SIP rather than trying
> to get h323 working for
> > it.
> >
> > On the other hand, if you don't use SIP anywhere
> else, and you are
> > using h323, I could see your reason for going this
> way.
> >
> >
> >
> >
> >
> > Quoting Brent Jones <gijones at clear.net.nz>:
> >
> >> Hi
> >>
> >> Is anyone using the H323 on there Asterisk setup.
> >> I have a Cisco ATA-186 using H323 I am having
> trouble setting it up.
> >> At one stage you could dial a number from an ata
> connected phone and
> >> the console would recognise and do some of the
> dialplan.
> >>
> >> But you couldn't get the phones to ring if you
> dialed them.
> >> If someone has a H323 setup could you please send
> me a copy of
> >> the relevant section of extension.conf and
> OOH323.conf. I am using
> >> the OOH323 drivers they seemed to have installed
> all right.
> >>
> >> If this has been covered before could someone
> point me to the
> >> year and month in the archives.
> >
> >
> >
> > _______________________________________________
> > VoIP mailing list
> > VoIP at ckts.info
> > http://lists.ckts.info/mailman/listinfo/voip
> > Project Web Page: http://www.ckts.info/
> >
> >
> > --
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.5.446 / Virus Database: 268.18.17/731 -
> Release Date:
> > 23/03/2007 15:27
> >
> >
>
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
>
More information about the VoIP
mailing list