[VoIP] Anyone Using H323 protocol - Preferably on a Cisco ATA

[mgoughton]

hi,
may be you may also like to pop in to betws y coed for a chat
martin
0690 2 568
conwy valley railway museum
----- Original Message ----- 
From: "john jones" <jjones3601 at yahoo.com>
To: "Ian Jolly" <ian at uax.org.uk>; "Voice Over IP Tandem for Analog Switches" 
<voip at ckts.info>
Sent: Thursday, March 29, 2007 9:42 PM
Subject: Re: [VoIP] Anyone Using H323 protocol - Preferably on a Cisco ATA


> Ian,
> Are you in Wales?  I'll be going to Llanberis in
> North Wales near Bangor at the end of April.   Maybe
> if you are somwhat near and you have some time, we
> could meet?
>
> Thanks!
>
> John
> --- Ian Jolly <ian at uax.org.uk> wrote:
>
>> >From the Cisco website - you appear to need a
>> licence to use SIP with this
>> ATA !!
>>
>> "Table 2. Cisco ATA 186 Analog Telephone Adaptors
>> Description Part Number
>> Cisco ATA 186 with 600 ohm impedance ATA186-I1-A
>> Cisco ATA 186 with complex impedance (270 ohm in
>> series with 750 ohm and 150
>> NF in parallel) ATA186-I2-A
>> CallManager Unit license for each ATA (1 per device
>> required) SW-CCM-UL-ANA
>> Unit license for SIP, for each ATA (1 per device
>> required) SW-SMH-UL-ATA-1P
>> Cisco CallManager Express license for each ATA (1
>> per device required)
>> SW-CCME-UL-ANA
>>
>>
>> Ian Jolly
>>
>> +64 8532 864 from CNET
>> +44 (0)  352      82 26 (via a 1929 GPO Rural
>> Automatic eXchange!) from
>> CNET - the Heritage Telephone Network
>> +44 (0)1352 83 82 26 (via a 1929 GPO Rural Automatic
>> eXchange!) from  Public
>> Telephone Network
>> FWD Telephone No  83 2230
>>
>>
>> ----- Original Message ----- 
>> From: "Shane Young" <voiptandem at shaneyoung.com>
>> To: <voip at ckts.info>
>> Sent: Saturday, March 24, 2007 11:53 AM
>> Subject: Re: [VoIP] Anyone Using H323 protocol -
>> Preferably on a Cisco ATA
>>
>>
>> > It might be easier to use SIP rather than trying
>> to get h323 working for
>> > it.
>> >
>> > On the other hand, if you don't use SIP anywhere
>> else, and you are
>> > using h323, I could see your reason for going this
>> way.
>> >
>> >
>> >
>> >
>> >
>> > Quoting Brent Jones <gijones at clear.net.nz>:
>> >
>> >> Hi
>> >>
>> >> Is anyone using the H323 on there Asterisk setup.
>> >> I have a Cisco ATA-186 using H323 I am having
>> trouble setting it up.
>> >> At one stage you could dial a number from an ata
>> connected phone and
>> >> the console would recognise and do some of the
>> dialplan.
>> >>
>> >> But you couldn't get the phones to ring if you
>> dialed them.
>> >> If someone has a H323 setup could you please send
>> me a copy of
>> >> the relevant section of extension.conf and
>> OOH323.conf.  I am using
>> >> the OOH323 drivers they seemed to have installed
>> all right.
>> >>
>> >> If this has been covered before could someone
>> point me to the
>> >> year and month in the archives.
>> >
>> >
>> >
>> > _______________________________________________
>> > VoIP mailing list
>> > VoIP at ckts.info
>> > http://lists.ckts.info/mailman/listinfo/voip
>> > Project Web Page: http://www.ckts.info/
>> >
>> >
>> > -- 
>> > No virus found in this incoming message.
>> > Checked by AVG Free Edition.
>> > Version: 7.5.446 / Virus Database: 268.18.17/731 -
>> Release Date:
>> > 23/03/2007 15:27
>> >
>> >
>>
>> _______________________________________________
>> VoIP mailing list
>> VoIP at ckts.info
>> http://lists.ckts.info/mailman/listinfo/voip
>> Project Web Page: http://www.ckts.info/
>>
>
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
>