[VoIP] Adtran (was Cisco 3810)

[Lee Spenadel]

The Adtran problem may not be apparent in all situations.  Russ Price did
some testing after my reported problems with consistent dial pulsing from
the Adtran FXO to my SxS.  Russ' and my switches were somewhat intolerant of
the timing of the Adtran pulsing.  Russ tried modifying the pulsing
make/break times in asterisk with no change in pulsing to his SxS.   In my
case it lead to mis-dialing of extensions.  It doesn't do this all of the
time.  It's somewhat intermittent.  When I placed a WildCard X100P in my
Asterisk box and set it up to pulse to my SxS, all worked fine.

I guess the bottom line is that the Adtran FXO does pulse out the digits,
but depending on the tolerances of your switch, you may or may not have a
problem. 

Lee

-----Original Message-----
From: voip-bounces at ckts.info [mailto:voip-bounces at ckts.info] On Behalf Of
Jonathan Kay
Sent: Thursday, May 31, 2007 7:41 AM
To: Voice Over IP Tandem for Analog Switches
Subject: Re: [VoIP] Adtran (was Cisco 3810)

Lee Spenadel wrote:
> So was I.  How much was it?  I'm wondering if that would be a nice device
to
> use for FXO in lieu of the Adtran given the outpulsing problem toward my
> SxS.
>
>   

Is there a definite problem with Adtran channel banks and rotary dialling?
I'm more than a bit hacked off if that's the case, after paying loads of 
shipping to the UK and big bucks to obtain an FXO loaded Adtran.
I've still not had time to set the thing up so far.

Jon K
_______________________________________________
VoIP mailing list
VoIP at ckts.info
http://lists.ckts.info/mailman/listinfo/voip
Project Web Page: http://www.ckts.info/