[VoIP] Cisco 3810

[John Novack]

I was guided by John Jones, since there are MANY flavors of the 3810 
equipped with different sizes of memory, flash and option cards.
If you don't have the daughter board that holds up to 6 FXO,FXS or E&M 
modules, 16k of flash and 64K of main memory ( I THINK I have all of 
that correct ) then you can't do what is needed. Those USUALLY go for 
75-100 bucks with six ports equipped . There are a few on eBay now but 
higher price.

JJ provided me with the SIP OS to replace the one born in the machine, 
and much hand holding to get to where I am so far. I have yet to 
configure the FXO circuits and test them. The 3810 normally comes 
equipped with an AC power supply. There was a 48 VDC power supply, but 
not as many of them show up
Since it is SIP, the patches provided by Max and Russ don't apply.
Paul Wills is using one of these along with a Linksys wireless router as 
his complete CNET interface.


Dennis D Hock wrote:
> Lee,
>
> I purchased one a short time ago, but havent done anything with it yet.  I
> think it was right around $110 or 20 can't recall for sure.  It looks to be
> in very nice shape, it wasfrom that fellow that was shown on here from
> Ebay.
>
> Dennis Hock
>
> -----voip-bounces at ckts.info wrote: -----
>
>
> To: <jnovack at stromberg-carlson.org>, "'Voice Over IP Tandem for Analog
> Switches'" <voip at ckts.info>
> From: "Lee Spenadel" <lee at spenadel.com>
> Sent by: voip-bounces at ckts.info
> Date: 05/31/2007 07:14AM
> Subject: Re: [VoIP] Cisco 3810
>
> So was I.  How much was it?  I'm wondering if that would be a nice device
> to
> use for FXO in lieu of the Adtran given the outpulsing problem toward my
> SxS.
>
> L
>
> -----Original Message-----
> From: voip-bounces at ckts.info [mailto:voip-bounces at ckts.info] On Behalf Of
> John Novack
> Sent: Thursday, May 31, 2007 12:10 AM
> To: Voice Over IP Tandem for Analog Switches
> Subject: Re: [VoIP] Cisco 3810
>
> I see Russ Price is awake this late to enjoy my Cisco!
>
> JN
>
>
> John Novack wrote:
>   
>> On a lighter note, with John Jones expert help, I have been working a
>> little with the Cisco 3810
>> Reloaded with SIP software, the box can be equipped with 6 ports, in any
>> mix, of FXS, FXO or E&M circuits.
>> Paul Wills is using one for his switch and ANI.
>> I have mine on line right now set up for several foreign Ringback tones.
>> Though it may not be available at all times, give it a call at 666-3101
>> through 3104 for Cisco's electronic version of some other than North
>> American precise tones. UK, RU, EG and JP
>> No phones connected, so one can call at odd hours.
>>
>> John Novack
>> _______________________________________________
>> VoIP mailing list
>> VoIP at ckts.info
>> http://lists.ckts.info/mailman/listinfo/voip
>> Project Web Page: http://www.ckts.info/
>>
>>
>>     
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
>
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voipProject Web Page:
> http://www.ckts.info/
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
>
>