[VoIP] CAT6 Cable

[Shane Young]

I don't know about cat6, but we used to put in 25pr cat5 stuff all the time.

I'm not sure what your application is that requires cat6, keeping in  
mind that ethernet is lmited to 100 meters (about 328 feet).

With that in mind, you don't have much room left to run cables from  
your termination points on each end out to workstations.

If whatever you are connecting is very close to the ends, then you'd be ok.

Is this for something other than ethernet?



Quoting Lee Spenadel <lee at spenadel.com>:

> Does anyone know if 100pr or 25pr CMP (plenum rated) cable is manufactured
> that is suitable for installation in conduit between two buildings?  The
> buildings are across the street from one another and the conduit length will
> be about 200 - 300'.  I believe the conduit will be 4' steel pipe.
>
>
>
> Thanks in advance
>
> Lee
>
>
>
>
>
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
>

--Shane
+1-821-7311 CNET

----------------------------------------------------------------