[VoIP] Need tools & docs to work on vt1005v on my asterisk.

Steph Kerman stfkerman at jps.net
Fri Nov 2 21:24:04 CST 2007


Don,

Of course but the firmware is stored somewhere.  *If* the device is 
socketed, it can be pulled out, written as a copy of the non-V version 
and reinstalled.

Steph

Don E. Wisdom wrote:
> Steph,
> The locking is in the firmware I believe.   I don't think its possible
> to erase all the "locking settings" because it's a custom written
> firmware image (for the linksys PAP)  Not just anyone needs to have VoIP
> hardware locked to a provider.   Its only the very big companies.
> --Don
>
>
>
>
>
>
> -----Original Message-----
> From: voip-bounces at ckts.info [mailto:voip-bounces at ckts.info] On Behalf
> Of Steph Kerman
> Sent: Friday, November 02, 2007 8:15 PM
> To: Voice Over IP Tandem for Analog Switches
> Subject: Re: [VoIP] Need tools & docs to work on vt1005v on my asterisk.
>
> Has anyone compared the boards to see how they differ?  It might be 
> something as simple as the contents of a socketed non-volatile memory.  
> If so, it should be possible to convert "v's" to "non-v's".
>
> =SK=
>
> john jones wrote:
>   
>> Of course probably the most important point is the quality of the
>>     
> VT1005.  I guess if you have a "free" VT1005, it is worth some effort to
> use it.  I've found the VT1005 a bit annoying to config and fine tune
> but, it does work OK if you spend the time.  I think Doug Alderdice
> probably has the put the most effort into this if I recall correctly.
>   
>> JJ
>>
>> ----- Original Message ----
>> From: John Novack <jnovack at stromberg-carlson.org>
>> To: john jones <jjones3601 at yahoo.com>; Voice Over IP <voip at ckts.info>
>> Sent: Friday, November 2, 2007 6:46:30 PM
>> Subject: Re: [VoIP] Need tools & docs to work on vt1005v on my
>>     
> asterisk.
>   
>>
>>
>>
>>   
>>
>>
>>
>>
>>
>> john jones wrote:
>>
>>   I'm not sure the bticonfig stuff won't unlock a Vonage Vt1005.  I
>>     
> only have my production VT1005 and am unwilling to risk it but from what
> I remember if it gets a valid config, it should take this.   Maybe John
> N knows this to be wrong?
>   
>> John
>>   
>>
>> I know little.
>>
>> But, I do believe that with the locked version, one is unable to
>>     
> change
>   
>> the provisioning server address. If there was a way to fake that,
>> perhaps, but I don't know if one could ever get in and change it. 
>>
>>
>>
>> JN
>>
>>
>>
>>
>>   
>> ----- Original Message ----
>> From: John Novack <jnovack at stromberg-carlson.org>
>> To: Voice Over IP Tandem for Analog Switches <voip at ckts.info>
>> Sent: Friday, November 2, 2007 5:11:49 PM
>> Subject: Re: [VoIP] Need tools & docs to work on vt1005v on my
>>     
> asterisk.
>   
>> No.
>> I have a VT 1005 working on my system, and a VT1005V in use from
>>  Vonage.
>> No known way (yet ) to unlock one.
>>
>> JN
>>
>>
>> Dennis D Hock wrote:
>>   
>>   
>>     John Novack may know of a secret password.  Not sure.
>>
>> Dennis H.
>>
>> -----voip-bounces at ckts.info wrote: -----
>>
>>
>> To: "Mahesh.Veerappa at sonusnet.com, Voice Over IP Tandem for Analog
>> Switches" <voip at ckts.info>
>> From: "Nathaniel D. Watson" <watson061502 at ameritech.net>
>> Sent by: voip-bounces at ckts.info
>> Date: 11/02/2007 03:45PM
>> Subject: Re: [VoIP] Need tools & docs to work on vt1005v on my
>>     
>>   
>>    asterisk.
>>   
>>   
>>     Perhaps someone else knows a work-around or hack, but I'm under
>>     
> the
>   
>> impression that if it came with Vonage, then it is "locked" for use
>>     
>>   
>>    with
>>   
>>   
>>     them.
>>
>> Nathan
>>
>>
>> on 11/2/07 3:21 PM, Mahesh at maheshkv_india at yahoo.com wrote:
>>
>>   
>>     
>>     
>>       Recently got my asterisk installed and woking within my network
>>     
> with
>   
>> softphones....
>>
>>   Would like to tweak my old vt1005v leftover from vonage to get
>>       
>>     
>>   
>>    some
>>   
>>   
>>     
>>           
>>       
>>     
>>     more fun
>>   
>>     
>>     
>>       with asterisk...
>>
>>   Please favour me with the link to docs & tools necessary... I
>>       
>>     
>>   
>>    already
>>   
>>   
>>     
>>           
>>       
>>     
>>     read
>>   
>>     
>>     
>>       thru the vt1005v information in the mailing list archive and
>>     
> feel
>   
>>       
>>     
>>   
>>    ready
>>   
>>   
>>     
>>           
>>       
>>     
>>     for
>>   
>>     
>>     
>>       action...
>>
>>   --Thanks
>>
>>   --Zorgan
>>
>>  __________________________________________________
>> Do You Yahoo!?
>> Tired of spam?  Yahoo! Mail has the best spam protection around
>> http://mail.yahoo.com
>> _______________________________________________
>> VoIP mailing list
>> VoIP at ckts.info
>> http://lists.ckts.info/mailman/listinfo/voip
>> Project Web Page: http://www.ckts.info/
>>     
>>       
>>     
>>     _______________________________________________
>> VoIP mailing list
>> VoIP at ckts.info
>> http://lists.ckts.info/mailman/listinfo/voip
>> Project Web Page: http://www.ckts.info/
>> _______________________________________________
>> VoIP mailing list
>> VoIP at ckts.info
>> http://lists.ckts.info/mailman/listinfo/voip
>> Project Web Page: http://www.ckts.info/
>>
>>   
>>     
>>   
>>     
>>
>>
>>
>>   
>>     
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
>
> !SIG:472bd9f5320619127620819!
>
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
>
>   


More information about the VoIP mailing list