[VoIP] Cisco 3810

[Don E. Wisdom]

If someone has access to a enterprise partner CCO account you can
download new bootrom images (mine isn't enterprise partner :( )

--Don










-----Original Message-----
From: voip-bounces at ckts.info [mailto:voip-bounces at ckts.info] On Behalf
Of john jones
Sent: Friday, October 19, 2007 2:52 PM
To: Voice Over IP Tandem for Analog Switches
Subject: Re: [VoIP] Cisco 3810

It is socketed and the part number is something like BOOT-381 .  It is a
PLCC format so I guess it could be copied but I don't know anybody with
a PLCC copier.   If you google for MC-3810 memory, I'm sure you'll find
the part number.

John

----- Original Message ----
From: Steph Kerman <stfkerman at jps.net>
To: Voice Over IP Tandem for Analog Switches <voip at ckts.info>
Sent: Friday, October 19, 2007 4:39:34 PM
Subject: Re: [VoIP] Cisco 3810


john jones wrote:
> The physical difference are unreliable. The outside pictures may show
 
> the part number. A V3 version IMHO is guaranteed to have a boot prom 
> which will recognize 16M flash ( You are correct, this is 16M not
 16k) 
> and 64M DRAM. Unless you see a "show version" output on a pre-V3 
> router, you may not be able to upgrade the memory. The boot prom
 seems 
> impossible to get.
What is the part #?  Is it socketed?  Why can't it be copied?
> Your best approach is to see the output of the show ver. It not only 
> shows the memory, but also the analog modules installed. Note that
 the 
> 16k of config register memory is fixed and is always 16k so no need
 to 
> worry about it.
Thanks John!
Steph
> cisco MC3810 (MPC860) processor (revision 06.07) with 61440K/4096K 
> bytes of memory.
> Processor board ID 10118324
> PPC860 PowerQUICC, partnum 0x0000, version A03(0x0013)
> Channelized E1, Version 1.0.
> Bridging software.
> X.25 software, Version 3.0.0.
> SuperLAT software (copyright 1990 by Meridian Technology Corp).
> TN3270 Emulation software.
> MC3810 SCB board (v05.A0)
> 1 Six-Slot Analog Voice Module (v03.K0)
> 1 Analog FXS voice interface (v03.K0) port 1/1
> 1 Analog FXS voice interface (v03.K0) port 1/2
> 1 Analog E&M voice interface (v03.K0) port 1/4
> 1 Analog FXO voice interface (v03.K0) port 1/6
> 1 3-DSP(slot2) Voice Compression Module(v01.A0)
> 1 Ethernet/IEEE 802.3 interface(s)
> 1 Serial network interface(s)
> 2 Serial(sync/async) network interface(s)
> 256K bytes of non-volatile configuration memory.
> 16384K bytes of processor board System flash (AMD29F016)
>
> Configuration register is 0x2102
>
> Hope this helps!
>
> John
>
>
> ----- Original Message ----
> From: Steph Kerman <stfkerman at jps.net>
> To: Voice Over IP Tandem for Analog Switches <voip at ckts.info>
> Sent: Friday, October 19, 2007 4:08:48 PM
> Subject: Re: [VoIP] Cisco 3810
>
>
> How does one identify with certainty whether a unit is a MC3810V-3,
> MC3810V or MC3810?
>
> Is there a reliable ID label or is it possible for a newer housing to
> contain an older circuit board?
>
> Are there mechanical differences that would permit reliable
> identification?
>
> Can one rely on a sign on message at the console or is the sign on
> message generic and not indicate the version?
>
> I assume JN meant 16MB flash. Is this the rare case of a safe
> assumption?
>
> Steph
>
> John Novack wrote:
>> Do a search on MC3810
>>
>> Best choice:
>> MC3810V-3
>> MC3810 and MC3810V can't take 64 K memory
>> 64K ram
>> 16K flash
>> AVM
>> some number of FXO/FXS/E&M
>> Some of us have either surplus port boards or are willing to do a
>>     
>  swap.
>   
>> Just make sure the AVM is there.
>> I don't remember now who was accepting a best offer of $75 plus 
>> shipping, perhaps someone else does. There may still be more there,
>>     
>  just 
>   
>> not listed.
>> Memory and flash upgrades are too expensive, so be patient and set
 up
>>     
>  a 
>   
>> search and have eBay e-mail you every day there are new listings,
 and
>>     
>  
>   
>> something will show up soon.
>>
>> John Novack
>>
>>
>> Donald Froula wrote:
>>   
>>     
>>> I've decided to purchase a Cisco 3810 for some extra
>>> FXS and FXO ports and to experiment with the T1
>>> interface and some test equipment I have. It seems the
>>> Ebay source for these has dried up, and the
>>> information on memory and other options is difficult
>>> to get on what I see offered by others. Any suitable
>>> units gathering dust out there?
>>>
>>> Thanks,
>>>
>>> Don
>>> _______________________________________________
>>> VoIP mailing list
>>> VoIP at ckts.info
>>> http://lists.ckts.info/mailman/listinfo/voip
>>> Project Web Page: http://www.ckts.info/
>>>
>>>   
>>>     
>>>       
>>   
>>     
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
>
>
>
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
>
>   
_______________________________________________
VoIP mailing list
VoIP at ckts.info
http://lists.ckts.info/mailman/listinfo/voip
Project Web Page: http://www.ckts.info/



_______________________________________________
VoIP mailing list
VoIP at ckts.info
http://lists.ckts.info/mailman/listinfo/voip
Project Web Page: http://www.ckts.info/

!SIG:47191a5285188062367153!