[VoIP] SIP Registration

[Lee Spenadel]

The only special thing I did on the Asterisk side was to make sure that nat
was set to yes.  There was nothing special that I implemented on the router
our ATA at my friends house.  Let me know if you would like me to send you
the SIP code in my conf file that defines this relationship.

Lee

-----Original Message-----
From: voip-bounces at ckts.info [mailto:voip-bounces at ckts.info] On Behalf Of
Dennis D Hock
Sent: Thursday, October 25, 2007 9:14 AM
To: Voice Over IP Tandem for Analog Switches
Subject: Re: [VoIP] SIP Registration
Importance: High


lee,

I am looking to do the same thing for a friend.  Can you tell me if there
is anything special on either end with the translations.  Or can you /
would you be willing to shoot me a copy of your translations for both the
Asterisk and the ATA.  I plan on using a SIPURA SPA2K.

Thanks again in advance for any and all information,

Dennis Hock

-----voip-bounces at ckts.info wrote: -----


To: "'Voice Over IP Tandem for Analog Switches'" <voip at ckts.info>
From: "Lee Spenadel" <lee at spenadel.com>
Sent by: voip-bounces at ckts.info
Date: 10/25/2007 08:44AM
Subject: [VoIP] SIP Registration

I have an ATA at a friend's house that hangs off my Asterisk switch.  Every
hour or so I get a SIP registration message on my console:



   -- Registered SIP '349XXXX' at 24.60.244.56 port 2231 expires 3600



Does anyone know why I would be getting the reg message at this frequency?



Thanks

Lee











_______________________________________________
VoIP mailing list
VoIP at ckts.info
http://lists.ckts.info/mailman/listinfo/voip
Project Web Page: http://www.ckts.info/
_______________________________________________
VoIP mailing list
VoIP at ckts.info
http://lists.ckts.info/mailman/listinfo/voip
Project Web Page: http://www.ckts.info/