[VoIP] Display 10-Digit Caller ID on SIP Phones?

[Jack Ryan]

The short answer is, I don't know.

The longer answer is: Have you tried setting the caller ID name to blank in
asterisk? I'm assuming of course that the IP address is in the name field.
Remember that the CALLERID macros of asterisk 1.2 no longer work in 1.4, you
need to use a new macro CALLERID(part).

That's my Brownian thought for the day.

Jack



On 27/02/2008, John Novack <novackster at gmail.com> wrote:
>
> I suspect the answer lies in the Cisco configuration
>
> Not for the faint of heart, the 7940 and 60 phones have a great many
> version changes as well as several different protocols
> The 79xx SIP versions are a huge topic.
> Use Google and see what you can discover
> So far I have only been successful in getting SIP version 7.1 to work
> with Asterisk. Anything later fails on outgoing calls, and I haven't yet
> devoted the time to digging through the XML files to see what it wants.
> Conflicting answers can be found on the net as well.
> My 7960 does display the calling number correctly ( 8 digits for a CNET
> call ), as well as the name, but all of my stuff is still 1.2
> Why? because it mostly works!
> 1.4 seems to  still have serious problems.
> Are you current at 1.4.18?
> Some have rolled back to 1.4.9 or 1.4.13 for more stability.
>
> John Novack
>
>
> Lee Spenadel wrote:
> > I have an Asterisk 1.4 installation as well and my Polycom SIP phones
> > display only the 10 digit phone number. I'm not doing anything special
> with
> > my sip.conf file.
> >
> > Lee
> >
> > -----Original Message-----
> > From: voip-bounces at ckts.info [mailto:voip-bounces at ckts.info] On Behalf
> Of
> > Jonathan Taylor
> > Sent: Tuesday, February 26, 2008 10:40 AM
> > To: voip at ckts.info
> > Subject: [VoIP] Display 10-Digit Caller ID on SIP Phones?
> >
> > I have an Asterisk 1.4 installation with a combination of SIP phones and
> > analog phones, connected to both a VoIP gateway and a POTS line.  Most
> of
> > the incoming calls come in though the POTS.
> >
> > Incoming calls are displayed on the SIP phones (Cisco 7940) as
> > <num>@<address>, where <num> is the 10-digit phone number and <address>
> is
> > the IP address of my PBX.
> >
> > Is there a way to configure the system (or the phone) to display only
> the
> > 10-digit number?  That would reduce clutter on the display and allow
> other
> > phone functions to work more smoothly, IMO.
> >
> > Thanks
> >
> >
> > _______________________________________________
> > VoIP mailing list
> > VoIP at ckts.info
> > http://lists.ckts.info/mailman/listinfo/voip
> > Project Web Page: http://www.ckts.info/
> >
> > _______________________________________________
> > VoIP mailing list
> > VoIP at ckts.info
> > http://lists.ckts.info/mailman/listinfo/voip
> > Project Web Page: http://www.ckts.info/
> >
> >
>
> --
> Dog is my co-pilot
>
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
>