[VoIP] Display 10-Digit Caller ID on SIP Phones?

[Jonathan Taylor]

I'll give that a shot.  The caller ID number shows up correctly on the
analog phones, so I had been suspecting either the (internal) SIP
configuration or the configuration of the phones themselves.

> The short answer is, I don't know.
>
> The longer answer is: Have you tried setting the caller ID name to blank
> in
> asterisk? I'm assuming of course that the IP address is in the name field.
> Remember that the CALLERID macros of asterisk 1.2 no longer work in 1.4,
> you
> need to use a new macro CALLERID(part).
>
> That's my Brownian thought for the day.
>
> Jack
>
>
>
> On 27/02/2008, John Novack <novackster at gmail.com> wrote:
>>
>> I suspect the answer lies in the Cisco configuration
>>
>> Not for the faint of heart, the 7940 and 60 phones have a great many
>> version changes as well as several different protocols
>> The 79xx SIP versions are a huge topic.
>> Use Google and see what you can discover
>> So far I have only been successful in getting SIP version 7.1 to work
>> with Asterisk. Anything later fails on outgoing calls, and I haven't yet
>> devoted the time to digging through the XML files to see what it wants.
>> Conflicting answers can be found on the net as well.
>> My 7960 does display the calling number correctly ( 8 digits for a CNET
>> call ), as well as the name, but all of my stuff is still 1.2
>> Why? because it mostly works!
>> 1.4 seems to  still have serious problems.
>> Are you current at 1.4.18?
>> Some have rolled back to 1.4.9 or 1.4.13 for more stability.
>>
>> John Novack
>>
>>
>> Lee Spenadel wrote:
>> > I have an Asterisk 1.4 installation as well and my Polycom SIP phones
>> > display only the 10 digit phone number. I'm not doing anything special
>> with
>> > my sip.conf file.
>> >
>> > Lee
>> >
>> > -----Original Message-----
>> > From: voip-bounces at ckts.info [mailto:voip-bounces at ckts.info] On Behalf
>> Of
>> > Jonathan Taylor
>> > Sent: Tuesday, February 26, 2008 10:40 AM
>> > To: voip at ckts.info
>> > Subject: [VoIP] Display 10-Digit Caller ID on SIP Phones?
>> >
>> > I have an Asterisk 1.4 installation with a combination of SIP phones
>> and
>> > analog phones, connected to both a VoIP gateway and a POTS line.  Most
>> of
>> > the incoming calls come in though the POTS.
>> >
>> > Incoming calls are displayed on the SIP phones (Cisco 7940) as
>> > <num>@<address>, where <num> is the 10-digit phone number and
>> <address>
>> is
>> > the IP address of my PBX.
>> >
>> > Is there a way to configure the system (or the phone) to display only
>> the
>> > 10-digit number?  That would reduce clutter on the display and allow
>> other
>> > phone functions to work more smoothly, IMO.
>> >
>> > Thanks
>> >
>> >
>> > _______________________________________________
>> > VoIP mailing list
>> > VoIP at ckts.info
>> > http://lists.ckts.info/mailman/listinfo/voip
>> > Project Web Page: http://www.ckts.info/
>> >
>> > _______________________________________________
>> > VoIP mailing list
>> > VoIP at ckts.info
>> > http://lists.ckts.info/mailman/listinfo/voip
>> > Project Web Page: http://www.ckts.info/
>> >
>> >
>>
>> --
>> Dog is my co-pilot
>>
>> _______________________________________________
>> VoIP mailing list
>> VoIP at ckts.info
>> http://lists.ckts.info/mailman/listinfo/voip
>> Project Web Page: http://www.ckts.info/
>>
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
>
>
>