[VoIP] ENUM working in Asterisk

[Ian Jolly]

Are you using the different line s6 in the [macro-dialcnet] for version 
1.4.X ?

=>s,6(startloop),Set(ENUM=${ENUMLOOKUP(${ARG1},ALL,,1,std.ckts.info)})
; USE ABOVE LINE FOR Asterisk 1.4 !!!

Ian Jolly



----- Original Message ----- 
From: "Richard Lane" <richardlane at westnet.com.au>
To: "Voice Over IP Tandem for Analog Switches" <voip at ckts.info>
Sent: Wednesday, January 02, 2008 10:09 AM
Subject: Re: [VoIP] ENUM working in Asterisk


> Hello All,
>
> So I was running 1.4.15.0 and have upgraded to 1.4.16.2
>
> I have not had emun working at all so far.
>
> I have been looking at the extensions.conf file that was produced for me
> by Ian Jolly and have been thinking of rewriting the loop function in
> the script with a do while loop.
>
> After playing around with the file I have reached the conclusion that
> there is still a problem with the ENUMLOOKUP function.  I have posted
> the verbose output of the CLI
>
>     -- Executing [0011448081 at 060271local:1]
> Macro("SIP/271433-0837e308", "dialcnet|448081") in new stack
>    -- Executing [s at macro-dialcnet:1] NoOp("SIP/271433-0837e308",
> "448081") in new stack
>    -- Executing [s at macro-dialcnet:2] Set("SIP/271433-08378f20",
> "enumresult=") in new stack
>
> Notice the enumresult is always nothing. Can somebody post me a result
> of a enum lookup to some test number on someones system so I can try a
> direct call. Does the ENUM DNS lookup system in CKTS use IAX2 SIP or H323?
>
> I am still scratching my head but am keen to get my collection of old
> telephones working!
>
> Richard
>
>
>
> windmill wrote:
>> I think Shane was asking what you were running, i.e. before you upgraded
>> to 1.4.16.2.
>>
>> If you were running 1.2 before the ENUMLOOKUP has changed in 1.4 but if
>> you were running 1.4 then the ENUMLOOKUP should still work okay.
>>
>> Brian
>>
>> Richard Lane wrote:
>>
>>> 1.4.16.2
>>> latest zap
>>> latest lib
>>>
>>> Shane Young wrote:
>>>
>>>
>>>> No, my previous enum configuration worked fine.
>>>>
>>>> What version of Asterisk are you running?
>>>>
>>>> --Shane
>>>>
>>>> Quoting Richard Lane <richardlane at westnet.com.au>:
>>>>
>>>>
>>>>
>>>>
>>>>> Hi Shane
>>>>>
>>>>> Was there anything you needed to change in order to get it working. I 
>>>>> am
>>>>> still trying to get my system running. So far I can dial internally 
>>>>> but
>>>>> cannot place a call to others.
>>>>>
>>>>> Richard
>>>>>
>>>>> Shane Young wrote:
>>>>>
>>>>>
>>>>>
>>>>>> I built Asterisk 1.4.16.2 this morning and ENUM seems to be working 
>>>>>> again.
>>>>>>
>>>>>>
>>>>>> --Shane
>>>>>> +1-821-7311 CNET
>>>>>>
>>>>>> ----------------------------------------------------------------
>>>>>>
>>>>>> _______________________________________________
>>>>>> VoIP mailing list
>>>>>> VoIP at ckts.info
>>>>>> http://lists.ckts.info/mailman/listinfo/voip
>>>>>> Project Web Page: http://www.ckts.info/
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>> _______________________________________________
>>>>> VoIP mailing list
>>>>> VoIP at ckts.info
>>>>> http://lists.ckts.info/mailman/listinfo/voip
>>>>> Project Web Page: http://www.ckts.info/
>>>>>
>>>>>
>>>>>
>>>>>
>>>> --Shane
>>>> +1-821-7311 CNET
>>>>
>>>> ----------------------------------------------------------------
>>>>
>>>> _______________________________________________
>>>> VoIP mailing list
>>>> VoIP at ckts.info
>>>> http://lists.ckts.info/mailman/listinfo/voip
>>>> Project Web Page: http://www.ckts.info/
>>>>
>>>>
>>>>
>>>>
>>> _______________________________________________
>>> VoIP mailing list
>>> VoIP at ckts.info
>>> http://lists.ckts.info/mailman/listinfo/voip
>>> Project Web Page: http://www.ckts.info/
>>>
>>>
>>>
>>>
>>>
>> _______________________________________________
>> VoIP mailing list
>> VoIP at ckts.info
>> http://lists.ckts.info/mailman/listinfo/voip
>> Project Web Page: http://www.ckts.info/
>>
>>
>
> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/