[VoIP] Zaptel Issues

[John Novack]

Russ Price wrote:
> Richard Lane wrote:
>   
>> I am using CentOS 5.0. I had been using this with no problems but I was 
>> hacked by a robot on the net. I have tried your command in modprobe.conf 
>> and it still give me the following output:
>>
>> [root at kelly ~]# ztcfg -vv
>>
>> Zaptel Version: 1.4.10.1
>> Echo Canceller: MG2
>> Configuration
>> ======================
>>
>>
>> Channel map:
>>
>> Channel 01: FXO Kewlstart (Default) (Slaves: 01)
>> Channel 02: FXS Kewlstart (Default) (Slaves: 02)
>>
>> 2 channels to configure.
>>
>> [root at kelly ~]#
>>
>> Everything else is working perfectly. Any other ideas before I take to 
>> it with an axe?
>>
>>     
>
> Is your /etc/zaptel.conf set up correctly? Note also that if you change 
> the operating mode, you will either need to unload and reload the 
> modules, or reboot.
>   
And if you up the kernel, either manually or through an automatic yum, 
you will need to recompile.
Not this problem, but have been caught by that in the past!

John Novack

> _______________________________________________
> VoIP mailing list
> VoIP at ckts.info
> http://lists.ckts.info/mailman/listinfo/voip
> Project Web Page: http://www.ckts.info/
>
>   

-- 
Dog is my co-pilot